the training device for active and passive mobilisation AP Tower therapy chair - the multifunctional training device for active, assestive and passive mobilisation. The positioning, training, therapy and rehabilitation tower is ideal for physiotherapy, shiatsu or massage practice and rehabilitation. The AP Tower enables active and passive treatment options for sports, therapy, training and mobilisation. The system can be combined with a variety of other therapy tools such as the PremiumGym function board, gymnastic bands, super loops, fascia rolls, gymnastic balls, weights, etc. There are no limits and the application possibilities are endless. The AP Tower can be used to intelligently and consistently treat skeletal displacements caused by tension, dislocations or similar. The patient can actively support the therapy on the therapy chair while the therapist works passively. Possible sequences: Chest mobilisation + shoulder girdle Mobilisation of thoracic spine + shoulder joints Torso stabilisation Introduction to push-ups Lateral trunk stabilisation Stretching chest muscles + hip flexors Strengthening arm flexors Stretching the broad back muscle + arm extensors Rowing: Strengthening shoulder blade muscles Myofascial treatment adductors Myofascial treatment of calf muscles Myofascial treatment of the anterior thigh muscles Myofascial treatment of the shin muscles Stretching of gluteal muscles Stretching hip flexors + knee extensors Strengthening of gluteal muscles Stretching of the hamstring muscles The therapy and training system for free mobility is available in 2 different versions: birch coloured oiled walnut with light beige upholstery or birch colourless with lime upholstery. Scope of delivery: AP Tower therapy chair Stainless steel push-through bar, 30 mm diameter 2 fascia rollers, suitable for the push-through bar 2 clamping rings for push-through bar Optional for an extra charge: PremiumGym function board Pelvi Disc complete set Pelvi Disc Shiatsu arm rests Face cushion Board-Board Wooden bar 60 x 30 mm Wooden rod 40 x 30 mm Metal rod 60 cm Metal rod 40 cm Dimensions: Width (diameter of base) approx. 66 cm Length approx. 125 cm Height (highest setting) approx. 120 cm Height (lowest setting) approx. 60 cm Weight approx. 25 kg

Soft, comfortable, washable Lounger cover in terry cloth stretch quality: 75% cotton and 25% polyester Excellent fit, even after frequent washing Non-iron and suitable for tumble drying Machine washable: coloured 60°C, white 90°C All-round elasticated drawstring (fitted cover) Sizes:65 x 195 cm80 x 200 cmVariants: with nose slitwithout nose slit

Soft, comfortable, washable Bolster cover Bolster covers in terry cloth stretch quality: 75 % cotton and 25 % polyester Super fluffy quality 220g/sqm Excellent fit, even after frequent washing Non-iron, colourfast and suitable for tumble drying Machine wash: coloured 60°C, white 90°C Elasticated sidesAvailable in three sizes:40 x 15 cm50 x 15 cm65 x 15 cm

This is the sale of exhibition models in mint condition. Only valid while stocks last. The Capre M therapy tables from Lojer are stable and easy-to-use tables that have been specially developed for massage and are unbeatable value for money. The Capre therapy tables are all equipped with durable, high-quality upholstery and have a high-quality surface made of original Skai artificial leather. As the motor is concealed and the surface is smooth, the tables are easy to clean. The height of the electric therapy table can be adjusted smoothly and quietly. The upholstered head section with nose slit and the arm sections of the four-part therapy table are quick and easy to adjust using a gas spring. The width of the demo table is 65 cm. Available equipment: with 4-part lying surface Length: 202 cm Width: 65 cm Standard headboard (3-part, U-shape) Central roller lifting system All-round control bar Future upholstery, Pearl colour Technical features Safe working load of 210 kg with 4-section lying surface length: 202 cm width: 65 cm Therapy table electronically height-adjustable from 45-92 cm / can be moved down very far Stepless, gas spring-supported head section adjustment Stepless arm section quick adjustment by means of gas spring 50° angle adjustment of the armrest Adjustment range of the armrests 34 cm Armrests have a unique safety feature the concealed motor (24 inch) is non-pulling, gravity causes downward movement Safety lock switch Oval frame tubes Warranty: Steel frame construction 10 years and the motor 2 years Electric height adjustment with 360° all-round control bar - This makes it possible to adjust the height of the treatment table from all sides. Stepless quick armrest adjustment by means of gas spring, 50° angle adjustment of the armrest Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

90 x 205 cm | 4-part lying surface | electrically adjustable This is the sale of an exhibition model in mint condition. Only valid while stocks last. Care bed with 4-section mattress base The ScanAfia XHS is an electrically adjustable care bed with a 4-section mattress base. The care bed is easy to operate and has been specially developed for nursing homes, retirement homes and for home care. The ScanAfia XHS care bed has a low minimum height and offers various position settings such as height, back, thigh and calf adjustment via the electric handset. Manual emergency lowering of the back section is also integrated. The base of the care bed consists of ABS plastic base plates with breathing holes that are easy to remove, clean and disinfect. The four central lockable double castors offer high manoeuvrability with one directional castor. The bed frame and bed ends of the ScanAfia XHS care bed are made of solid wood. The care bed has a safe 24 V low-voltage power supply and its electric motors and control units are splash-proof. Details: Size: 90 x 205 cm 4-section mattress base Electrically adjustable height Electrically adjustable back, thigh and calf sections Adjustment via hand switch 4 central lockable double castors (125 mm) Manual emergency lowering of the back section Breathable plastic base plates with breathing holes Easy to clean and disinfect Bed frame and bed ends made of solid wood Integrated holder for raising aid Integrated holder for infusion stand Max. Max. load: 260 kg Transport and delivery options for the therapy bed Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

with integrated nose slit | 70 x 200 cm Terry cloth with nose slit The reclining towel with nose slit is a particularly fluffy, soft towelling towel made of pure cotton. The towelling has a densely woven quality (450g/m²) and is tested for harmful substances in accordance with the Oeko-Tex standard. The towelling has an integrated nose slit and is printed with the AcuMax logo. Material: cotton Size: 70 x 200 cm Colour: anthracite Print: AcuMax logo Washable at 60° C

Soft, comfortable, washable Cushion cover Neck pillow covers in towelling stretch quality: 75 % cotton and 25 % polyester Super fluffy quality 220g/sqm Excellent fit, even after frequent washing Non-iron, colourfast and suitable for tumble drying Machine wash: coloured 60°C, white 90°C Elasticated sides Order neck pillow / croissant cover now!

Cushion without cover 40 x 40 cm Filling: rhombic cut PU rods 95°C washable, suitable for tumble drying

100 pieces Massage table face pads - deluxe version Made of Airlaid (non-woven made of cellulose, structured, pleasantly soft) Packaging unit: 100 pieces

30 x 25 x 4 cm Relaxed positioning of the face in prone position Reduces pressure points on the face Washable cover The face support is comfortable and relieves pressure for patients. It is ideal for a relaxing massage in the prone position. Cover washable on a gentle cycle at 60°C, professional dry cleaning Do not bleach, iron up to 110°C (take care when ironing with steam) Not suitable for tumble drying Colour blue Material: Viscoelastic ether foam Cover velour 75% cotton, 25% polyester Dimensions: 30 x 25 x 4 cm

27 x 23 x 6.5 cm Anatomically shaped for comfortable positioning of the head Soft material moulds to the shape of the face Large nose slit Easy to disinfect With the Sport-Tec disinfectable face rest, your patients lie even more comfortably and can therefore relax perfectly during treatment. The face support is anatomically shaped and moulds to the patient's face thanks to its soft material. The integrated, large nose slit allows the patient to breathe easily at all times. The support can also be used as a head rest in the supine position. Thanks to the smooth surface made of TPU film, the face support can be wiped clean with conventional disinfectant wipes. It can also be cleaned with conventional soapy water. This makes the face pad ideal for use in the practice or clinic. Product features: Can be disinfected with conventional wipe disinfectant (low alcohol content) Material: Foam with TPU film Dimensions (L x W x H): 27 x 23 x 6.5 cm

100 pieces Footrests for treatment tables made of fleece. Size: 42 x 60 cm Colour: white Packaging unit: 100 pieces For protection or as a base for your table.

20 pieces Fleece protective sheets / couch pads Material: PP fibre fleece, white 1 PU = 20 pieces

Vinyl foam Foot mat / table pad "Ahaus" Vinyl foam with textile inlay surface-treated, i.e. bacteria and fungi cannot develop Anti-stretch property due to textile inlay, therefore best dimensional stability Vinyl foam - therefore best skin compatibility the non-slip surfaces prevent both slipping on the mat and the mat itself from slipping Sizes: 600 x 400 x 6 mm Colours: grey, corn blue, forest green, black Areas of application: Medical, massage and physiotherapy practices, dialysis and oncol. Practices, sauna, beauty and wellness areas, solariums

made of vinyl Transparent footrest for treatment tables (can also be used as a desk pad). Made of transparent vinylbactericidalfungicidalSize XL: 600 x 400 x 2 mmSize XXL: 800 x 600 x 2 mm (textured on one side)

Soft, comfortable, washable Half roll cover 40 x 7.5 cm Half roll covers in terry cloth stretch quality: 75 % cotton and 25 % polyester Super fluffy quality 220g/sqm Excellent fit, even after frequent washing Non-iron, colourfast and suitable for tumble drying Machine wash: coloured 60°C, white 90°C Elasticated sides Order half roll cover 40 x 7.5 cm now!

Head cushion PVC For massage and therapy tables. The cushion is manufactured in one piece according to DIN 5316 and PVC welded. Size: 195 x 140 x 50/20 mm Colour: black or blueWith head recess

100 pieces High-quality and hygienic disposable covers in croissant form made of non-woven paper to protect the headrest cushion. Pleasant for the patient: This cover has no seams on the surface and is elasticated for a perfect fit. 100 pieces per pack

Three-quarter roll, half roll or roundKnee and neck roll The knee and neck roll from Stolzenberg is made from high-quality foam. The high-quality imitation leather cover has an integrated zip. The knee and neck roll can be used for different body positions as a positioning or relief aid. When used as a knee roll, it enables better treatment of the feet and legs. For use in the neck area, it can be used as an additional neck support. A knee and neck roll generally supports an ergonomic posture, relieves pressure on the legs and arms and improves the treatment result.

Vintage look Knee and neck roll in vintage look The knee and neck roll from Stolzenberg is made from high-quality soft foam. The cover is made from high-quality gym mat fabric with leather accents made from hand-finished cowhide for the perfect vintage look. Knee and neck rolls are suitable as positioning and relief aids that support an ergonomic posture and thus provide pressure relief. The three-quarter roll can be used in the neck area as a neck roll to provide comfortable support for the head and spine and ensure optimum positioning. It can also be used as a knee roll, allowing better treatment of the feet and legs. The knee and neck roll fits perfectly with the Proflex Classic Vintage treatment table.

Exhibition model, like NEW with manufacturer's warranty This is the sale of exhibition models in mint condition. Only valid while stocks last. Limburg Basis 3 - Demo model with full equipment - 2 years manufacturer's warranty Available variant: 5-section mattress base 3-section mattress base with footrest adjustment up to 85 3-part head section with swivelling and lowerable armrests, which can also be used to widen the upholstery Electric height adjustment via all-round switching Extra powerful and extra fast electric motor Roller lifting system Upholstery colour Toronto NEW! NEW: Colour range with the innovative Staynu technology... Makes surfaces dirt-repellent and hard-wearing like never before. Thanks to the new, particularly hard-wearing surface finish, regular maintenance of high-traffic surfaces has never been easier. A special coating seals the surface so that dirt particles do not adhere. Cosmetics such as lipstick, make-up, discolouration from jeans and even permanent pens and ballpoint pens can be easily removed. Technical data Frame: Sturdy tubular steel construction, permanently scratch-resistant, powder-coated Length x width in cm: 200 x 65 Electric height adjustment, approx. 50-90 cm Head section adjustment via robust gas pressure spring, negative: 45°; positive: 45°, with nose slot and insert as standard Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC Equipped as standard with a safety lock box in accordance with MPG and BfArM Order the Limburg Basis 3 treatment table now! Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

terry cloth | washable Lounger cover for Relax Sensation wooden/wellness loungers The lounger cover is suitable for the Relax Sensation wooden/wellness loungers. The fitted sheet only covers the reclining surface, a cover for the belly cushion can be ordered separately. The lounger cover is made of terry cloth and is washable at 95° C. It offers a perfect fit thanks to the elasticated drawstring. Terry cloth Elasticated cord Washable at 95° C Available in four colours: Anthracite Bordeaux natural orange

Main features Extremely large height adjustment range Electronic HyLO adjustment for simplified transfer to the table and tilt function for gravity-assisted treatments Adjustable legs with levelling feet Equipped with a unique, patented technology developed by Finnish experts. The Manuthera therapy table supports the therapist in his work and enables the best possible result for the patient during diagnosis and treatment. The Manuthera therapy table is a "one-for-all" treatment table for demanding examinations and treatments by manual therapists of various specialisations such as OMT physiotherapists, chiropractors, osteopaths, napprapaths, sports massage therapists, orthopaedists, etc. The Manuthera therapy table takes therapeutic work to a new level and supports countless treatment and diagnostic methods thanks to its patented operating concept, based on two synchronised lifting motors in a high-tech structure, for unique multi-traction options and a wide range of other functions. The patient can be moved gently and silently into the desired therapeutic and anatomical positions and mobilisations can be performed in three dimensions using traction, flexion, lateral flexion and rotation with the aid of gravity. The design of the table with its two motorised drives and bearings on all moving parts improves the ergonomics of therapeutic work, making it less stressful and achieving better therapeutic results. Technical features Wheels with brake function for easy transport and manoeuvring on the spot Head section adjustable in two directions for sophisticated 3D functionality for mobilisation of the cervical spine and neck through vertical and lateral movements of the head Two-part thorax section for vertical movements and a 3D rotation movement Lower body section with extension/flexion, lateral flexion and 3D rotation movement Multi-adjustable foot section: upright position, foot support when lying down and step function Easily adjustable, ergonomic, stable levers to fix the upholstered surfaces in the desired position Drop function: traction drop, which enables easier and more multi-faceted manipulation of the hip area Arm sections with infinitely variable height adjustment and lateral movement options Safety edges stop all movements of the table on contact Easy-care, durable, biocompatible, soft moulded lying surface 2-year manufacturer's guarantee

Suitable for massage, cosmetics or tattoo studios Massage chair The massage chair can be customised in just a few simple steps. The ergonomics and upholstery allow comfortable sitting during treatment, e.g. for massage, cosmetics or tattooing. The seat, armrests and headrest can be easily adjusted. The massage chair is ready for use within seconds and can be easily transported in the bag supplied. Customised adjustment Headrest can be adjusted with a quick-release fastener Adjustable headrest position Load capacity up to 120 kg Foldable, incl. carry bag

40 x 30 x 8 cmMassage head cushion with integrated zip Size: 40 x 30 x 8 cm Soft massage head cushion from Stolzenberg with imitation leather cover and integrated zip. The massage cushion is versatile and offers a high level of comfort during physiotherapy or massage treatments. The massage head cushion supports a comfortable posture, relieves pressure on the spine and thus increases relaxation during a treatment.

With ring release, infinitely height-adjustable 55 to 75 cmThe Maxi rolling stool from Stolzenberg has a round seat with 2-layer upholstery. Infinitely variable height adjustment from 55 to 75 cm Gas pressure suspension Round seat plate with 2-layer upholstery (60 mm) High-gloss polished aluminium 5-legged frame Double castors This rolling stool in a classic design offers a high level of seating comfort. The Maxi rolling stool is infinitely height-adjustable from 55 to 75 cm using gas pressure suspension. The round seat has a 2-layer upholstery (60 mm) that is particularly comfortable and easy to clean. The 5-legged frame is made of high-gloss polished aluminium. Thanks to the double castors, the castor stool is suitable for all Bode and is ideal for use in the office, practice, workshop or at a desk.

1 roll 2-ply, perforated, white 59 cm x 50 mScope of delivery: 1 roll

9 rolls / box. Made of cellulose. 2-ply. Doctor rolls - couch paper very hardwearing easy to unroll 2-ply, perforated, white made of cellulose 9 rolls / carton Price per box of 9 rolls Size: 50 m x 39 cm (L x W) Shipping: per 2 boxes (1 parcel) postage + packaging CHF 10.90 from 18 boxes (1 pallet) postage + packing is CHF 79.00

9 rolls / box. Made of cellulose. 2-ply. Doctor rolls - couch paper very hardwearing easy to unroll 2-ply, perforated, white made of cellulose 9 rolls / carton Price per box of 9 rolls Size: 50 cm x 50 m (W x L) Shipping: per 2 boxes (1 parcel) postage + packaging CHF 10.90 from 18 cartons (1 pallet) postage + packaging is CHF 79.00

9 rolls / box. Made of cellulose. 2-ply. Doctor rolls - couch paper very hardwearing easy to unroll 2-ply, perforated, white made of cellulose 9 rolls / carton Price per box of 9 rolls Size: 50 m x 59 cm (L x W) Shipping: per 2 cartons (1 parcel) postage + packaging CHF 10.90 from 18 cartons (1 pallet) postage + packaging is CHF 79.00

electrically adjustable via all-round rail | 3-part head section with lowerable arm sections | 3-part lying surface This is the sale of exhibition models in mint condition. Only valid while stocks last. Model One Pro 3-section treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with lowerable arm sections Electric height adjustment: with all-round rail Wellness head section: with (incl. horns & cover) Luxury upholstery with saddle stitch seam Bed width: 65 cm Upholstery: Standard Upholstery colour: Deap Sea (Toronto) Frame colour: polar white All-round switch for height adjustment The Model One Pro 3-section treatment table has a 3-section lying surface with an ergonomic shape. The therapy table is equipped with two motors and therefore offers a wide range of applications for various treatment options. The back section can be infinitely adjusted by motor, allowing the patient to be moved from a lying to a sitting position without any effort. The treatment table offers maximum functionality and quality and is perfectly harmonised with a harmonious design. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding offer optimum comfort. There are numerous other options available. (Fig. Model One 3-section, 3-section lying surface, 200 x 65 cm, with all-round rail, 3-section head section with lowerable arm sections, base frame in polar white, upholstery Toronto Deap Sea) Technical data: Length: 200 cm Width: 65 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, mobile at any height with patient Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 53 to 103 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating in polar white. Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. The upholstery colour is Toronto Deap Sea. Lying surface The standard mattress base is 3-part with a length of 200 cm and a width of 65 cm. 3-part headboard with lowerable armrests Infinitely adjustable arm sections. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. Wellness headboard incl. horns Head section with large face opening for pressure-free, soft facial positioning. The wellness headboard includes a soft foam cushion (croissant). An optional cover is also available. Height adjustment: with all-round rail - this allows the height of the treatment table to be adjusted from all sides. All-round rail Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

electrically adjustable via all-round rail | 3-part head section with lowerable arm sections | 4-part lying surface This is the sale of exhibition models in mint condition. Only valid while stocks last. Model One Pro 4-section treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with lowerable arm sections Head section with double adjustment Electric height adjustment: with all-round rail Wellness head section: with (incl. horns & cover) Luxury upholstery with saddle stitch seam Bed width: 65 cm Upholstery: Standard Upholstery colour: cherry (Toronto) Frame colour: grey aluminium All-round switch for height adjustment The Model One Pro 4-section treatment table has a 4-section lying surface with an ergonomic shape. The therapy table is equipped with three motors and therefore offers a wide range of applications for various treatment options. The back section can be infinitely adjusted by motor, allowing the patient to be moved from a lying to a sitting position without any effort. The seat is also infinitely adjustable via the electric motor and enables the patient's leg position to be adjusted quickly and easily. The treatment table offers maximum functionality and quality and is perfectly harmonised with a harmonious design. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding provide optimum comfort. There are also numerous options for customisation. (Fig. Mdel One Pro 4-part, 4-part lying surface, 200 x 60/70 cm, with all-round rail, 3-part head section with lowerable armrests, wellness head section, base frame in grey aluminium, Toronto cherry upholstery) Technical data: Length: 200 cm Width: 60/70 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, mobile at any height with patient Back section continuously adjustable via electric motor Seat continuously adjustable via electric motor Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge padding with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 53 to 103 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating in grey aluminium. Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. The upholstery colour is Toronto cherry. Lying surface The standard mattress base is 3-section with a length of 200 cm and a width of 60/70 cm. 3-part headboard with lowerable armrests Infinitely adjustable arm sections. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. Head section with double adjustment The head section can be adjusted in the opposite direction, i.e. it can be tilted. You can also adjust the height of the head section horizontally with double adjustment. This allows the patient to be treated in a sitting position or used for positioning legs and arms. You can also position patients laterally. The head section with double adjustment is only possible with a 3-part head section. Wellness head section incl. croissant Headboard with large face opening for pressure-free, soft facial positioning. The wellness headboard includes a soft foam cushion (croissant). An optional cover is also available. Height adjustment: with all-round rail - this allows the height of the treatment table to be adjusted from all sides. All-round rail Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

This is the sale of exhibition models in mint condition. Only valid while stocks last.Model One Therapy Plus treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with synchronised adjustment, infinitely variable via gas pressure springElectric height adjustment: with all-round railTable width: 44 / 78 cmUpholstery: standardUpholstery colour: sky (Pandoria)Frame colour: polar whiteThe Model One Therapy Plus treatment table with 5-section, anatomically moulded lying surface offers maximum functionality and quality perfectly coordinated with a harmonious design. The therapy table has a fixation strap rail on both sides. Thanks to the drainage position adjustment, the treatment table can be adjusted to the roof position. The foot section can also be infinitely adjusted up to the sitting position using a gas pressure spring. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding offer optimum comfort. The fold-down side sections allow the lying surface to be widened. (Image: Model One Therapy Plus, 5-section mattress base, 200 x 44/78 cm, with all-round rail, 1-section headboard, base frame in polar white, Pandoria sky upholstery)Technical data for standard equipment: Length: 200 cm Width: 44 / 78 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, mobile at any height with patient Fold-down side sections to widen the lying surface Drainage position continuously adjustable via gas pressure spring Foot section infinitely adjustable via gas pressure spring up to sitting position Fixing strap rail on both sides Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 53 to 103 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating. Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. Standard upholstery thickness: 7 - 7.5 cm. Lying surface The standard mattress base is 5-section with a length of 200 cm and a width of 44 or 78 cm. The mattress base can be infinitely adjusted to the roof position using a gas pressure spring and the foot section can be adjusted up to the sitting position. The side sections can be folded down to create a wider or narrower lying surface. 3-part head section with synchronised adjustmentInfinitely adjustable arm sections that can be adjusted synchronously using gas springs. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. The synchronised adjustment makes it easier for the therapist to adjust the arm sections. Drainage position: Motorised - Positioning in the roof position is carried out using an additional electric motor. Positioning is simple and also possible with a patient. Height adjustment: With all-round rail - this allows the treatment table to be adjusted in height from all sides. All-round rail Do you have any questions or special requests or requirements? Give us a call: Tel +41 56 511 76 00We will be happy to advise you! Manuel WeltiKevin Welti Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

This is the sale of exhibition models in mint condition. Only valid while stocks last.Model One Therapy treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with synchronised adjustment, infinitely variable via gas pressure spring.Wellness head section incl. croissant and coverElectric height adjustment: with all-round rail Bed width: 65 cm Upholstery: Standard Upholstery colour: atoll (Toronto) / black (Toronto) / glacier (Pandoria) Frame colour: polar white The Model One Therapy treatment table with 3-section lying surface offers maximum functionality and quality perfectly harmonised with a harmonious design. The therapy table has a fixation strap rail on both sides. Thanks to the drainage position adjustment, the treatment table can be adjusted to the roof position. The foot section can also be continuously adjusted up to the sitting position using a gas pressure spring. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding offer optimum comfort. The ample legroom ensures that the therapist can work comfortably and conveniently. The Model One Therapy treatment table can be customised to meet all requirements. (Fig. Model One Therapy, 2-part lying surface, 200 x 65 cm, with all-round rail, 3-part head section with lowerable arm sections, base frame in polar white, Pandoria sky upholstery)Technical data for standard equipment: Length: 200 cm Width: 65 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, mobile at any height with patient Drainage position / roof position continuously adjustable via gas pressure spring Foot section continuously adjustable via gas pressure spring up to sitting position Fixation strap rail on both sides Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 53 to 103 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating. Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. Lying surface The standard mattress base is 3-section with a length of 200 cm and a width of 65 cm. The mattress base can be infinitely adjusted to the roof position and the foot section to the sitting position using a gas pressure spring. 3-part head section with synchronised adjustment Infinitely adjustable arm sections that can be adjusted synchronously using a gas spring. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. The synchronised adjustment makes it easier for the therapist to adjust the arm sections. Head section with double adjustment The head section can be adjusted in the opposite direction, i.e. it can be tilted. You can also adjust the height of the head section horizontally with double adjustment. This allows the patient to be treated in a sitting position or used for positioning legs and arms. You can also position patients laterally. The head section with double adjustment is only possible with a 3-part head section. Wellness head section incl. croissant Headboard with large face opening for pressure-free, soft facial positioning. The wellness headboard includes a soft foam cushion (croissant). Height adjustment: With all-round rail - this allows the treatment table to be adjusted in height from all sides. All-round rail Do you have any questions or special requests or requirements? Give us a call: Tel +41 56 511 76 00We will be happy to advise you! Manuel WeltiKevin Welti Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

foldable | 80/90 x 205 cm | 4-part lying surface | electrically adjustable This is the sale of an exhibition model in mint condition. Only valid while stocks last. Folding care bed with 4-part lying surface The patented Modux folding care bed is flexible and versatile and offers the patient a high level of comfort and ergonomic working conditions for care staff. The versatile functionality, low minimum height (27 cm) and neutral design make the Modux folding care bed a pleasant part of home care. For transport, the bed can be folded into a very small space (60 x 90 cm) so that it can also be transported by car. The motorised opening mechanism opens the bed ready for use at the touch of a button within a few minutes. Quick and easy to use, the Modux care bed is the durable and reliable solution for care environments where mobility and flexibility are essential. Standard technical features: 4-section slatted frame (80/90 x 205 cm) Electric height, back section, thigh section and calf section adjustment. Anti-Trendelenburg Lowest height only 28 cm Bed ends made of solid birch (pair) Double-locking sides made of solid birch with locking knob (pair) Hand control Individually lockable castors Integrated attachment for lifting pole Integrated attachment for infusion stand Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

100% cotton | 4-ply | breathable & temperature-regulating Universal blanket made of 4-ply cotton muslin 200 x 230 cm This cosy blanket made of 4-ply cotton muslin is pleasantly soft, temperature-regulating and breathable. With its beautiful texture and subtle, unobtrusive colours, it is an indispensable accessory for any style. A cosy friend on cold days and a must-have in warm weather! Information: Muslin blanket 200 x 230 cm made from 100% 4-ply cotton Temperature-regulating and breathable Soft and extremely pleasant on the skin in a beautiful, appealing double-face look Washable at 30° - 40° Made in Turkey Application: Therapy blanket Duvet replacement on warm nights Supplement on cold nights Couch blanket