Exhibition model, like NEW with manufacturer's warranty This is the sale of exhibition models in mint condition. Only valid while stocks last. Limburg Basis 3 - Demo model with full equipment - 2 years manufacturer's warranty Available variant: 5-section mattress base 3-section mattress base with footrest adjustment up to 85 3-part head section with swivelling and lowerable armrests, which can also be used to widen the upholstery Electric height adjustment via all-round switching Extra powerful and extra fast electric motor Roller lifting system Upholstery colour Toronto NEW! NEW: Colour range with the innovative Staynu technology... Makes surfaces dirt-repellent and hard-wearing like never before. Thanks to the new, particularly hard-wearing surface finish, regular maintenance of high-traffic surfaces has never been easier. A special coating seals the surface so that dirt particles do not adhere. Cosmetics such as lipstick, make-up, discolouration from jeans and even permanent pens and ballpoint pens can be easily removed. Technical data Frame: Sturdy tubular steel construction, permanently scratch-resistant, powder-coated Length x width in cm: 200 x 65 Electric height adjustment, approx. 50-90 cm Head section adjustment via robust gas pressure spring, negative: 45°; positive: 45°, with nose slot and insert as standard Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC Equipped as standard with a safety lock box in accordance with MPG and BfArM Order the Limburg Basis 3 treatment table now! Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

Exhibition model, like NEW with manufacturer's warranty This is the sale of exhibition models in mint condition. Only valid while stocks last. Limburg Basis 3 - Demo model with full equipment - 2 years manufacturer's warranty Available variant: 5-section mattress base 3-section mattress base with footrest adjustment up to 85 3-part head section with swivelling and lowerable armrests, which can also be used to widen the upholstery Wellness headboard incl. horns and cover Electric height adjustment via all-round control Extra powerful and extra fast electric motor Roller lifting system Frame colour: white aluminium (light grey) Upholstery colour: Toronto black Upholstery colour Toronto colour palette with the innovative Staynu technology makes surfaces dirt-repellent and hard-wearing like never before. Thanks to the new, particularly hard-wearing surface finish, regular maintenance of heavily used surfaces has never been easier. A special coating seals the surface so that dirt particles do not adhere. Cosmetics such as lipstick, make-up, discolouration from jeans and even permanent pens and ballpoint pens can be easily removed.Technical data Frame: Sturdy tubular steel construction, permanently scratch-resistant, powder-coated Length x width in cm: 200 x 65 Electric height adjustment, approx. 50-90 cm Head section adjustment via robust gas pressure spring, negative: 45°; positive: 45°, with nose slit and insert as standard Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC Equipped as standard with a safety lock box in accordance with MPG and BfArM Order the Limburg Basis 3 treatment table now! Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

This is the sale of exhibition models in mint condition. Only valid while stocks last. Kinos X5 treatment table - demo model, 2-year manufacturer's guarantee Head section: 3-part, U-model, gas spring supported Table top: 2-part table top Two height adjustment rods on both sides of the table for height and back section Lounger width: 65 cm Length 203 cm Hand supports (gas-assisted) Adjustment of the back section Hand supports (gas spring assisted) Upholstery material Future Colour Carbon Frame metal colour Carbon colour Electric lifting on castors Moulded plug (for head section) Nose slot insert (for head section) The Kinos X5 treatment table has a 5-section lying surface with a width of 65 cm, a 3-section head section and an adjustable foot section. The electronic height adjustment is standard with the footrests on both sides, The bed can be adjusted to a depth of up to 46 cm. The Kinos X treatment table was developed for professionals working in the demanding and diverse world of rehabilitation. The Kinos X has a large height adjustment range so that it can be easily adapted to different needs. The table is equipped with electric castors that make it particularly easy to move. Nordic steel is used for the Kinos X5 treatment table, the most sustainable steel in the world - with the world's first fossil-free steel projects. The paint used is resistant to wear and corrosion, but is also antimicrobial and destroys viruses and bacteria. The upholstery material Future is antimicrobial thanks to ISO certification. (Image: Kinos X5 treatment table, 5-section lying surface, 203 x 65 cm, with height adjustment rods, 3-section head section, frame metal colour carbon, poster colour carbon) Technical data: Length: 203 cm Width: 65 cm Electric height adjustment from approx. 46 - 95 cm using height adjustment rods on both sides Length of the back section: 52 cm Adjustment of the back section: 0 - 70° electrically Adjustment of the head section: 90° ... +35° Castors: Ø65 mm, electrically liftable (electric height adjustment on castors) Safety functions: automatic lifting in emergency situations Safety functions: Table is automatically locked after 120 minutes when not in use Safety functions: Motors do not pull, but lower with the help of gravity Moulded plug for head section Safe working load: 210 kg Height adjustment The height is adjusted using two adjustment rods on both sides. The back section is also adjusted using the adjustment rods. Safety system The therapy table is equipped with safety functions that ensure that the table is automatically raised in emergency situations, the table is automatically locked after 120 minutes of non-use and the motors are lowered with the help of gravity. Frame Nordic steel is used for the Kinos X5 treatment table, the most sustainable steel in the world - with the world's first fossil-free steel projects. The paint used is resistant to wear and corrosion, but is also antimicrobial and destroys viruses and bacteria. Upholstery The Future upholstery material is antimicrobial thanks to ISO certification. Lying surface The standard lying surface is 4-section with a length of 206 cm and a width of 65 cm. Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

2-part lying surface 50/70 x 200cm | 3-part head section | luxury upholstery | electric height adjustment This is the sale of exhibition models in mint condition. Only valid while stocks last. Proflex Classic therapy and treatment table with 2-section lying surface - demo model, 2-year manufacturer's guarantee Length: 200 cm Width: 50/70 cm Head section: 3-part with lowerable arm sections Electric height adjustment: with all-round rail Luxury upholstery with saddle stitch seam Bed width: 65 cm Upholstery: Standard Upholstery colour: Pandora glacier and Pandora anthracite Frame colour: polar white All-round switch for height adjustment The Proflex Classic treatment table has a 2-part lying surface with an ergonomic shape. The therapy table is characterised by its clear design and numerous equipment options. The frame construction with a load capacity of 200 kg is designed to ensure maximum legroom. The sturdy steel construction has a durable, scratch-resistant powder coating. The all-round edge padding with high-quality upholstery fabric offers the patient maximum comfort. The Proflex Classic treatment table is particularly suitable for physiotherapy and massage practices. Height adjustment With electric height adjustment, the therapy table is equipped with a high-quality Hanning turbo motor with a double-tip safety system manufactured in Germany. The height of the treatment table can be adjusted from approx. 50 to 94 cm using a hand switch as standard. An all-round rail is fitted. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating. The standard colour is polar white. Upholstery The therapy table has a high-quality upholstery fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. Colour palette Pandoria Material: Vinyl Coating: approx. 85 % PVC compound Backing: approx. 12 % BW/PES knitted fabric Thickness: 1.35 mm Properties: durable, tear-resistant, abrasion-resistant, easy-care, lightfast, oil and grease-resistant, resistant to disinfectants, resistant to sweat, urine and blood, antibacterial Surface appearance: Metallic effect UpholsteryLuxury upholstery with saddle stitching Lying surface The standard mattress base is 2-part with a length of 200 cm and a width of 50 / 70 cm. A wider mattress base (80 cm) can be selected as an option. 3-part headboard with lowerable armrests Infinitely adjustable arm sections. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. Height adjustment: with all-round rail - this allows the height of the treatment table to be adjusted from all sides. All-round rail Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

foldable | 80/90 x 205 cm | 4-part lying surface | electrically adjustable This is the sale of an exhibition model in mint condition. Only valid while stocks last. Folding care bed with 4-part lying surface The patented Modux folding care bed is flexible and versatile and offers the patient a high level of comfort and ergonomic working conditions for care staff. The versatile functionality, low minimum height (27 cm) and neutral design make the Modux folding care bed a pleasant part of home care. For transport, the bed can be folded into a very small space (60 x 90 cm) so that it can also be transported by car. The motorised opening mechanism opens the bed ready for use at the touch of a button within a few minutes. Quick and easy to use, the Modux care bed is the durable and reliable solution for care environments where mobility and flexibility are essential. Standard technical features: 4-section slatted frame (80/90 x 205 cm) Electric height, back section, thigh section and calf section adjustment. Anti-Trendelenburg Lowest height only 28 cm Bed ends made of solid birch (pair) Double-locking sides made of solid birch with locking knob (pair) Hand control Individually lockable castors Integrated attachment for lifting pole Integrated attachment for infusion stand Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

Exhibition model, like NEW with manufacturer's warrantyThis is the sale of exhibition models in mint condition. Only valid while stocks last. Limburg Basis 1 hydraulic - demo model - 2 years manufacturer's warranty Available variant: 4-part lying surface 3-part head section with lowerable armrests Hydraulic height adjustment via foot pedal Castors: Mobile with castors on one side as standard Toronto colour range NEW! NEW: Colour range with innovative Staynu technology... Makes surfaces more dirt-repellent and hard-wearing than ever before. Thanks to the new, particularly hard-wearing surface finish, regular maintenance of high-traffic surfaces has never been easier. A special coating seals the surface so that dirt particles do not adhere. Cosmetics such as lipstick, make-up, discolouration from jeans and even permanent pens and ballpoint pens can be easily removed. Technical data Length: 200 cm Width: 65 cm Hydraulic height adjustment from approx. 45-90 cm Head section adjustment via robust gas pressure spring Negative: 45° ; Positive: 45°, with nose slot and insert as standard Castors: Mobile with castors on one side as standard. Upholstery: All-round edge upholstery with high-quality original SKAI Sturdy tubular steel construction, permanently scratch-resistant powder-coated - made in Germany Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

This is the sale of exhibition models in mint condition. Only valid while stocks last.Model One Therapy Plus treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with synchronised adjustment, infinitely variable via gas pressure springElectric height adjustment: with all-round railTable width: 44 / 78 cmUpholstery: standardUpholstery colour: sky (Pandoria)Frame colour: polar whiteThe Model One Therapy Plus treatment table with 5-section, anatomically moulded lying surface offers maximum functionality and quality perfectly coordinated with a harmonious design. The therapy table has a fixation strap rail on both sides. Thanks to the drainage position adjustment, the treatment table can be adjusted to the roof position. The foot section can also be infinitely adjusted up to the sitting position using a gas pressure spring. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding offer optimum comfort. The fold-down side sections allow the lying surface to be widened. (Image: Model One Therapy Plus, 5-section mattress base, 200 x 44/78 cm, with all-round rail, 1-section headboard, base frame in polar white, Pandoria sky upholstery)Technical data for standard equipment: Length: 200 cm Width: 44 / 78 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, mobile at any height with patient Fold-down side sections to widen the lying surface Drainage position continuously adjustable via gas pressure spring Foot section infinitely adjustable via gas pressure spring up to sitting position Fixing strap rail on both sides Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 53 to 103 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating. Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. Standard upholstery thickness: 7 - 7.5 cm. Lying surface The standard mattress base is 5-section with a length of 200 cm and a width of 44 or 78 cm. The mattress base can be infinitely adjusted to the roof position using a gas pressure spring and the foot section can be adjusted up to the sitting position. The side sections can be folded down to create a wider or narrower lying surface. 3-part head section with synchronised adjustmentInfinitely adjustable arm sections that can be adjusted synchronously using gas springs. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. The synchronised adjustment makes it easier for the therapist to adjust the arm sections. Drainage position: Motorised - Positioning in the roof position is carried out using an additional electric motor. Positioning is simple and also possible with a patient. Height adjustment: With all-round rail - this allows the treatment table to be adjusted in height from all sides. All-round rail Do you have any questions or special requests or requirements? Give us a call: Tel +41 56 511 76 00We will be happy to advise you! Manuel WeltiKevin Welti Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

This is the sale of exhibition models in mint condition. Only valid while stocks last. Model One Pro 4-section treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with lowerable arm sectionsElectric height adjustment: with all-round rail Wellness head section: with (incl. horns) Bed width: 60 / 70 cm Upholstery: luxury upholstery with saddle stitchingUpholstery colours: fire (Pandoria) / royal (Pandoria) / anthracite (Pandoria)Frame colour: polar white The Model One Pro 4-section treatment table has a 4-section lying surface with an ergonomic shape. The therapy table is equipped with three motors and therefore offers a wide range of applications for various treatment options. The back section can be infinitely adjusted by motor, allowing the patient to be moved from a lying to a sitting position without any effort. The seat is also infinitely adjustable via the electric motor and enables the patient's leg position to be adjusted quickly and easily. The treatment table offers maximum functionality and quality and is perfectly harmonised with a harmonious design. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding provide optimum comfort. There are numerous other options available. (Fig. Mdel One Pro 4-section, 4-section mattress base, 200 x 60/70 cm, with all-round rail, wellness head section 1-section, base frame in polar white, Pandoria sky upholstery) Technical data for standard equipment: Length: 200 cm Width: 60 / 70 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) 3 motors, conveniently operated from both sides Roller lifting system with central operation, can be moved to any height with patient Back section continuously adjustable via electric motor Seat infinitely adjustable via electric motor Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge padding with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment has electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The height of the treatment table can be adjusted from approx. 53 to 103 cm. Safety system All Stolzenberg therapy tables are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental actuation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating. Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. The treatment table is equipped with luxury upholstery with saddle stitching. Lying surface The standard lying surface is in 4 parts with a length of 200 cm and a width of 60 or 70 cm. 3-part headboard with lowerable armrests Infinitely adjustable arm sections. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. Wellness headboard incl. horns Head section with large face opening for pressure-free, soft facial positioning. The wellness headboard includes a soft foam cushion (croissant). Height adjustment: with all-round rail - this allows the height of the treatment table to be adjusted from all sides. All-round rail Do you have any questions or special requests or requirements? Give us a call: Tel +41 56 511 76 00 We will be happy to advise you! Manuel Welti Kevin Welti Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

This is the sale of exhibition models in mint condition. Only valid while stocks last.Model One Therapy treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with synchronised adjustment, infinitely variable via gas pressure spring.Wellness head section incl. croissant and coverElectric height adjustment: with all-round rail Bed width: 65 cm Upholstery: Standard Upholstery colour: atoll (Toronto) / black (Toronto) / glacier (Pandoria) Frame colour: polar white The Model One Therapy treatment table with 3-section lying surface offers maximum functionality and quality perfectly harmonised with a harmonious design. The therapy table has a fixation strap rail on both sides. Thanks to the drainage position adjustment, the treatment table can be adjusted to the roof position. The foot section can also be continuously adjusted up to the sitting position using a gas pressure spring. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding offer optimum comfort. The ample legroom ensures that the therapist can work comfortably and conveniently. The Model One Therapy treatment table can be customised to meet all requirements. (Fig. Model One Therapy, 2-part lying surface, 200 x 65 cm, with all-round rail, 3-part head section with lowerable arm sections, base frame in polar white, Pandoria sky upholstery)Technical data for standard equipment: Length: 200 cm Width: 65 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, mobile at any height with patient Drainage position / roof position continuously adjustable via gas pressure spring Foot section continuously adjustable via gas pressure spring up to sitting position Fixation strap rail on both sides Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 53 to 103 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating. Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. Lying surface The standard mattress base is 3-section with a length of 200 cm and a width of 65 cm. The mattress base can be infinitely adjusted to the roof position and the foot section to the sitting position using a gas pressure spring. 3-part head section with synchronised adjustment Infinitely adjustable arm sections that can be adjusted synchronously using a gas spring. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. The synchronised adjustment makes it easier for the therapist to adjust the arm sections. Head section with double adjustment The head section can be adjusted in the opposite direction, i.e. it can be tilted. You can also adjust the height of the head section horizontally with double adjustment. This allows the patient to be treated in a sitting position or used for positioning legs and arms. You can also position patients laterally. The head section with double adjustment is only possible with a 3-part head section. Wellness head section incl. croissant Headboard with large face opening for pressure-free, soft facial positioning. The wellness headboard includes a soft foam cushion (croissant). Height adjustment: With all-round rail - this allows the treatment table to be adjusted in height from all sides. All-round rail Do you have any questions or special requests or requirements? Give us a call: Tel +41 56 511 76 00We will be happy to advise you! Manuel WeltiKevin Welti Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

Exhibition model, like NEW with manufacturer's warranty This is the sale of exhibition models in mint condition. Only valid while stocks last. Tedavi therapy table - demo model with full equipment - 2-year manufacturer's warranty Available variant: 2-part table surface 1-part head section +50° to -70° adjustable incl. nose slitHeight adjustment from 52 to 95 cmElectric height adjustment via foot switchLounger surface: 195 x 65 cm Frame colour: anthracite RAL 7043 Upholstery colour: amalfi black 060 The Tedavi 2-part scissor stretcher is perfect for therapeutic use. It offers stability, durability and excellent value for money. The therapy table is equipped with a powerful electric motor that meets the latest safety standards. It can be adjusted in height - from 52 to 95 cm - using a foot switch that is activated by a double push button. The integrated safety system offers protection for patients and therapists.The Tedavi therapy table with 1-piece head section and generous lying surface offers space for various treatments.Technical data 2-part scissor table1-part head section adjustable from +50° to -70°, including nose slot insertTable surface 195 x 65 cmWeight 65 kgHeight adjustment from 52 to 95 cmWith electric motor, adjustable by foot switchMedical deviceSafety standard according to the Federal Institute for Drugs and Medical Devices (BfArM) Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

electrically adjustable via all-round rail | 3-part head section with lowerable arm sections | 3-part lying surface This is the sale of exhibition models in mint condition. Only valid while stocks last. Model One Pro 3-section treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with lowerable arm sections Electric height adjustment: with all-round rail Wellness head section: with (incl. horns & cover) Luxury upholstery with saddle stitch seam Bed width: 65 cm Upholstery: Standard Upholstery colour: Deap Sea (Toronto) Frame colour: polar white All-round switch for height adjustment The Model One Pro 3-section treatment table has a 3-section lying surface with an ergonomic shape. The therapy table is equipped with two motors and therefore offers a wide range of applications for various treatment options. The back section can be infinitely adjusted by motor, allowing the patient to be moved from a lying to a sitting position without any effort. The treatment table offers maximum functionality and quality and is perfectly harmonised with a harmonious design. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding offer optimum comfort. There are numerous other options available. (Fig. Model One 3-section, 3-section lying surface, 200 x 65 cm, with all-round rail, 3-section head section with lowerable arm sections, base frame in polar white, upholstery Toronto Deap Sea) Technical data: Length: 200 cm Width: 65 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, mobile at any height with patient Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 53 to 103 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating in polar white. Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. The upholstery colour is Toronto Deap Sea. Lying surface The standard mattress base is 3-part with a length of 200 cm and a width of 65 cm. 3-part headboard with lowerable armrests Infinitely adjustable arm sections. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. Wellness headboard incl. horns Head section with large face opening for pressure-free, soft facial positioning. The wellness headboard includes a soft foam cushion (croissant). An optional cover is also available. Height adjustment: with all-round rail - this allows the height of the treatment table to be adjusted from all sides. All-round rail Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

electrically adjustable via all-round rail | 3-part head section with lowerable arm sections | 4-part lying surface This is the sale of exhibition models in mint condition. Only valid while stocks last. Model One Pro 4-section treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with lowerable arm sections Head section with double adjustment Electric height adjustment: with all-round rail Wellness head section: with (incl. horns & cover) Luxury upholstery with saddle stitch seam Bed width: 65 cm Upholstery: Standard Upholstery colour: cherry (Toronto) Frame colour: grey aluminium All-round switch for height adjustment The Model One Pro 4-section treatment table has a 4-section lying surface with an ergonomic shape. The therapy table is equipped with three motors and therefore offers a wide range of applications for various treatment options. The back section can be infinitely adjusted by motor, allowing the patient to be moved from a lying to a sitting position without any effort. The seat is also infinitely adjustable via the electric motor and enables the patient's leg position to be adjusted quickly and easily. The treatment table offers maximum functionality and quality and is perfectly harmonised with a harmonious design. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding provide optimum comfort. There are also numerous options for customisation. (Fig. Mdel One Pro 4-part, 4-part lying surface, 200 x 60/70 cm, with all-round rail, 3-part head section with lowerable armrests, wellness head section, base frame in grey aluminium, Toronto cherry upholstery) Technical data: Length: 200 cm Width: 60/70 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, mobile at any height with patient Back section continuously adjustable via electric motor Seat continuously adjustable via electric motor Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge padding with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 53 to 103 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating in grey aluminium. Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. The upholstery colour is Toronto cherry. Lying surface The standard mattress base is 3-section with a length of 200 cm and a width of 60/70 cm. 3-part headboard with lowerable armrests Infinitely adjustable arm sections. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. Head section with double adjustment The head section can be adjusted in the opposite direction, i.e. it can be tilted. You can also adjust the height of the head section horizontally with double adjustment. This allows the patient to be treated in a sitting position or used for positioning legs and arms. You can also position patients laterally. The head section with double adjustment is only possible with a 3-part head section. Wellness head section incl. croissant Headboard with large face opening for pressure-free, soft facial positioning. The wellness headboard includes a soft foam cushion (croissant). An optional cover is also available. Height adjustment: with all-round rail - this allows the height of the treatment table to be adjusted from all sides. All-round rail Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

90 x 205 cm | 4-part lying surface | electrically adjustable This is the sale of an exhibition model in mint condition. Only valid while stocks last. Care bed with 4-section mattress base The ScanAfia XHS is an electrically adjustable care bed with a 4-section mattress base. The care bed is easy to operate and has been specially developed for nursing homes, retirement homes and for home care. The ScanAfia XHS care bed has a low minimum height and offers various position settings such as height, back, thigh and calf adjustment via the electric handset. Manual emergency lowering of the back section is also integrated. The base of the care bed consists of ABS plastic base plates with breathing holes that are easy to remove, clean and disinfect. The four central lockable double castors offer high manoeuvrability with one directional castor. The bed frame and bed ends of the ScanAfia XHS care bed are made of solid wood. The care bed has a safe 24 V low-voltage power supply and its electric motors and control units are splash-proof. Details: Size: 90 x 205 cm 4-section mattress base Electrically adjustable height Electrically adjustable back, thigh and calf sections Adjustment via hand switch 4 central lockable double castors (125 mm) Manual emergency lowering of the back section Breathable plastic base plates with breathing holes Easy to clean and disinfect Bed frame and bed ends made of solid wood Integrated holder for raising aid Integrated holder for infusion stand Max. Max. load: 260 kg Transport and delivery options for the therapy bed Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

electrically adjustable via all-round rail | 3-part head section with lowering mechanism | 3-part lying surfaceThis is the sale of exhibition models in mint condition. Only valid while stocks last. Proflex Therapy treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with lowering mechanism via gas spring Electric height adjustment: with all-round rail Wellness head section: with (incl. horns) Luxury upholstery with saddle stitch seam Bed width: 50/70 cm Upholstery: Standard Upholstery colour: Black (Toronto) Frame colour: carbon grey All-round switch for height adjustment The Proflex Therapy treatment table has a 3-part lying surface with an ergonomic shape. The treatment table can be infinitely adjusted to the drainage position using a motor. The therapy table is characterised by its clear design and numerous equipment options. The frame construction with a load capacity of 200 kg is designed to ensure maximum legroom. The sturdy steel construction has a durable, scratch-resistant powder coating. The all-round edge padding with high-quality upholstery fabric offers the patient maximum comfort. The Proflex Classic treatment table is particularly suitable for physiotherapy and massage practices. (Fig. Proflex Therapy, 3-section lying surface, 200 x 50/70 cm, with all-round rail, 3-section head section, base frame in black (RAL), upholstery Toronto black) Technical data: Length: 200 cm Width: 50/70 cm Electric height adjustment from approx. 54 - 95 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, can be moved to any height with patient Foot section infinitely adjustable up to sitting position via gas pressure spring Infinitely variable motorised roof position / can be operated from both sides Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 54 to 95 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating in black (RAL). Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. The upholstery colour is Toronto black. The therapy table is equipped with luxury upholstery with saddle stitching. Lying surface The standard lying surface is 3-section with a length of 200 cm and a width of 50 / 70 cm. 3-part headboard with lowering mechanism via gas spring The armrests can be adjusted continuously and conveniently using a gas pressure spring. This ensures an optimal and relaxed position for the patient. Wellness head section incl. croissant Head section with large face opening for pressure-free, soft facial positioning. The wellness head section includes a soft foam cushion (croissant). An optional cover is also available. Drainage position: Motorised - An additional electric motor is used for positioning in the roof position. Positioning is simple and also possible with a patient. Height adjustment: With all-round rail - this allows the treatment table to be adjusted in height from all sides. All-round rail Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.

electrically adjustable via all-round rail | 3-part head section with lowerable arm sections | 7-part lying surfaceThis is the sale of exhibition models in mint condition. Only valid while stocks last. Model One Osteo treatment table - demo model, 2-year manufacturer's warranty Head section: 3-part with lowerable arm sections Electric height adjustment: with all-round rail Wellness head section: with (incl. horns & cover) Bed width: 65 cm Upholstery: Standard Upholstery colour: anthracite (Toronto) Frame colour: white aluminium All-round switch for height adjustment The Model One Osteo treatment table has a 7-section lying surface in an attractive design. The fold-down side sections allow the therapist to stand in an optimal position close to the patient. The therapy table has a fixation strap rail on both sides. Thanks to the drainage position adjustment, the treatment table can be adjusted to the roof position. The foot section can also be continuously adjusted up to the sitting position using a gas pressure spring. The high-quality components and stable frame construction of the therapy table ensure maximum stability and load-bearing capacity. The high-quality upholstery fabric and all-round edge padding offer maximum comfort. There are also numerous equipment options. (Fig. Model One Osteo, 7-section lying surface, 200 x 65 cm, with all-round rail, 3-part head section with lowerable arm sections, base frame in white aluminium, upholstery Toronto anthracite) Technical data: Length: 200 cm Width: 65 cm Electric height adjustment from approx. 53 - 103 cm by hand switch Electric height adjustment with high-quality Hanning turbo motor (Made in Germany) Roller lifting system with central operation, mobile at any height with patient Folding side sections for an optimum standing position close to the patient Drainage position continuously adjustable via gas pressure spring Foot section infinitely adjustable via gas pressure spring up to sitting position Fixation strap rail on both sides Sturdy tubular steel construction, permanently scratch-resistant powder-coated (Made in Germany) Upholstery: all-round edge upholstery with high-quality original SKAI Medical device in accordance with Directive 93/42 EEC In accordance with the current recommendations of the BfArM on "Integrated Safety" Height adjustment The standard equipment includes electric height adjustment. Equipped with a high-quality Hanning turbo motor with double-tip safety system manufactured in Germany. The treatment table can be adjusted in height from approx. 53 to 103 cm. Safety system All therapy tables from Stolzenberg are equipped with a safety system for integrated safety in accordance with the BfArM, which prevents accidental operation of the electric height adjustment. The motors are equipped with automation so that the table is automatically set to a safety state. The motor switches off within 3 seconds after the height adjustment has been made. This idle state prevents unintentional adjustment. The motor is also equipped with a freewheel clutch, the power of which is interrupted when travelling downwards towards an obstacle. This significantly reduces the risk of injury in the event of jamming. Frame The frame is a sturdy tubular steel construction with a durable scratch-resistant powder coating in white aluminium (light grey). Upholstery The therapy table is upholstered with a high-quality cover fabric and all-round edge padding with high-quality original SKAI, which ensures optimum patient comfort and is ideal for medical use. The upholstery colour is Toronto anthracite. Lying surface The standard lying surface is 7-section with a length of 200 cm and a width of 65 cm. The mattress base can be infinitely adjusted to the roof position and the foot section to the sitting position using a gas pressure spring. The side sections can be folded down and thus offer a close standing position to the patient. 3-part head section with lowerable arm sections Infinitely adjustable arm sections. This provides optimum positioning of the arms in the prone position and thus ensures relaxed shoulder and neck muscles. Wellness headboard incl. horns Head section with large face opening for pressure-free, soft facial positioning. The wellness headboard includes a soft foam cushion (croissant). An optional cover is also available. Drainage position: Motorised - An additional electric motor is used for positioning in the roof position. Positioning is simple and also possible with a patient. Height adjustment: With all-round rail - this allows the treatment table to be adjusted in height from all sides. All-round rail Transport and delivery options for the therapy table Collection in Bad Zurzach (free of charge): The treatment tables can be collected by prior arrangement from AcuMax Med AG, Neubergstrasse 3, 5330 Bad Zurzach. We will load the table free of charge. Shipping by forwarding agent to kerbside: Treatment tables can be delivered to the kerbside by a forwarding agent. Special transport by a haulage company costs CHF 200 per table for the whole of Switzerland. Note: The table is not brought into the practice room, but delivered to the kerbside. Personal delivery incl. insertion: Personal delivery including installation in the practice room by specialist staff is charged individually according to the cost and delivery address. With this service, the table is installed ready for use in the practice room and you receive a brief introduction to its function. The packaging material is taken back with you. Disposal of your old table: It is possible for us to take your old treatment couch and dispose of it. The cost of the work involved and the disposal fee is a flat rate of CHF 150.