EN 14683:2019 Type IIR | CE class I -- Available immediately -- Dispatch within 24 hours -- (1 pc. = 1 box of 50 masks) Medical face mask (surgical mask) made of 3-ply non-woven fabric with EN 14683:2019 type IIR (CE class I) certification. The medical face mask is secured behind the ears with elasticated straps. The adjustable nose clip guarantees an anatomically correct and comfortable fit of the medical face mask and prevents gaps between the nose and cheeks. Due to its high level of comfort, this medical face mask is ideal for longer procedures and treatments, but should be changed after two to three hours as it becomes soaked and therefore less effective after this time. The medical face mask type 2R is also suitable for use in the food industry. Box of 50. Medical face mask type IIR Complies with the European standard EN 14683:2019 Type IIR CE class I Filtration performance: > 98% Hypoallergenic, glass fibre and latex-free Box of 50 Material Front: 100% glass fibre-free non-woven fabric Inside: glass fibre-free filter medium Back: 100% glass fibre-free non-woven fabric Nose clip: Flexible wire, coated with plastic Elastic band: Cotton, elastane (length approx. 16.5 cm) Dimensions of the medical face mask (one size fits all) Length: 175mm ± 2mm Width: 95mm ± 2mm

S, M, L, XL | 100 pieces | blue | powder-free | EN 455 | EN 374 | CE-certified Nitrile disposable gloves made of nitrile in the colour blue. The nitrile glove is latex-free and therefore also suitable for allergy sufferers. Complies with EN 455 and EN 374 and is CE certified. Box of 100 Disposable nitrile glove textured fingertips Very tear-resistant and elastic latex-free powder-free non-sterile blue Disposable glove is suitable for the food industry, building cleaning, inpatient and outpatient care facilities, doctors' surgeries Manufacturers of the various sizes may differ. Quality assurance of disposable gloves EN 455 EN ISO 374 Regulation (EU) 2016/425 CE certified Pieces per box: 100

S, M, L, XL | 100 pcs. | black | powder-free | EN 455 - 1, 2, 3, 4; EN ISO 374 - 1, 2, 3, 4, 5 This black nitrile glove is a latex-free glove as an alternative to latex gloves. It is robust and offers very good tactile sensitivity. The black nitrile glove is powder-free and is supplied in a box of 100. They are ideal for allergy sufferers. It complies with EN 455 / EN 374 and is CE-certified. Properties and use of the black nitrile glove Disposable nitrile glove textured fingertips Very robust latex-free powder-free non-sterile black Can be worn on the right and left Disposable glove is suitable for hotels, catering, industry/crafts, hairdressing salons, tattoo and piercing studios Quality assurance of the examination gloves  EN 455 - 1, 2, 3, 4; EN ISO 374 - 1, 2, 3, 4, 5; ASTM D6319-10; Regulation (EU) 2016/425; AQL 1.5 CE labelling on all packaging levels CE classification: Class I The glove is free from thiuram substances, mercaptobenzothiazoles and zinc-2 mercaptobenzothiazoles. The accelerators used for production are zinc dibutyl dithiocarbamate (ZDBC) and zinc diethyl dithiocarbamate (ZDEC). Protective glove according to the regulation for personal protective equipment (EN 2016/425) category III. Further information on request. Pieces per box: 100

XS, S, M, L, XL, XXL | 100 pcs. | blue | powder-free | EN 455 | EN 374 | category III The MaiMed nitrile disposable glove solution 100 blue is a disposable nitrile glove with a good price-performance ratio. The MaiMed brand always guarantees top quality. This disposable glove is very tear-resistant and widely stretchable. Its thin walls and textured fingertips ensure good tactile sensitivity. As a latex-free disposable glove, it is also suitable for allergy sufferers. Properties and use of disposable nitrile gloves Disposable nitrile glove Brand name MaiMed textured fingertips Very tear-resistant and elastic latex-free powder-free non-sterile blue Disposable glove is suitable for the food industry, building cleaning, inpatient and outpatient care facilities, medical practices Quality assurance of disposable gloves EN 455 - 1, 2, 3, 4; ASTM D6319, EN ISO 374 - 1, 2, 3, 4, 5; CAT III; ASTM F1671 Regulation (EU) 2016/425; AQL 1.5 CE marking on all packaging levels CE classification: Class I The glove is free from thiuram substances, mercaptobenzothiazoles and zinc-2 mercaptobenzothiazoles. The accelerators used for production are zinc dibutyl dithiocarbamate (ZDBC) and zinc diethyl dithiocarbamate (ZDEC). Protective glove according to the regulation for personal protective equipment (EN 2016/425) category III. Further information on request. Pieces per box: 100

S, M, L, XL | 100 pcs. | white | powder-free | EN 455 | EN 374 | category III The MaiMed nitrile disposable glove solution 100 white is a disposable nitrile glove with a good price-performance ratio. The MaiMed brand always guarantees top quality. This disposable glove is very tear-resistant and widely stretchable. Its thin walls and textured fingertips ensure good tactile sensitivity. As a latex-free disposable glove, it is also suitable for allergy sufferers. Properties and use of disposable nitrile gloves Disposable nitrile glove Brand name MaiMed textured fingertips Very tear-resistant and elastic latex-free powder-free non-sterile white Disposable glove is suitable for the food industry, building cleaning, inpatient and outpatient care facilities, doctors' surgeries Quality assurance of disposable gloves EN 455 - 1, 2, 3, 4; ASTM D6319, EN ISO 374 - 1, 2, 3, 4, 5; CAT III; ASTM F1671 Regulation (EU) 2016/425; AQL 1.5 CE marking on all packaging levels CE classification: Class I The glove is free from thiuram substances, mercaptobenzothiazoles and zinc-2 mercaptobenzothiazoles. The accelerators used for production are zinc dibutyl dithiocarbamate (ZDBC) and zinc diethyl dithiocarbamate (ZDEC). Protective glove according to the regulation for personal protective equipment (EN 2016/425) category III. Further information on request. Pieces per box: 100

S, M, L, XL | 100 pieces | violet | powder-free | EN 455 | EN 374 | category III Nitrile examination and protective gloves in violet The Viola disposable nitrile gloves from Meditrade are suitable for handling cleaning agents, disinfectants and food. The protective glove is therefore used in laboratories, in the pharmaceutical industry, in professional cleaning and in catering. The powder-, protein- and latex-free disposable gloves are suitable for sensitive users. The micro-roughened surface ensures a good grip. The nitrile examination gloves are elasticated, tear-resistant, have a rolled edge and can be worn with both hands. Properties of nitrile gloves Disposable nitrile glove elasticated tear-resistant Skin-friendly latex-, powder- and protein-free non-sterile micro-roughened Colour: violet can be worn on the right and left with rolled edge Sizes: S to XL Package contents: 100 pieces per box Areas of application: The disposable nitrile gloves are suitable for handling cleaning agents and disinfectants, as well as food. The protective gloves are therefore used in laboratories, in the pharmaceutical industry, in professional cleaning, in the food sector e.g. catering etc. Quality assurance of examination gloves  EN 455 - 1, 2, 3, 4; EN 374 - 1, 2, 4, 5; EN 16523-1 Class I medical device according to regulation (EU 2017/745) Protective glove according to the regulation for personal protective equipment (EU 2016/425) category III.

S, M, L, XL | 100 pcs. | powder-free | white | EN 455 - 1, 2, 3, 4 The disposable glove soft PF is non-sterile. It is made of thin latex, which ensures that the examination glove has good tactile properties. Despite the thin surface, the latex disposable glove is solid and resistant. The micro-roughened facade ensures an optimum grip. It has a first-class fit. The disposable latex glove is powder-free. The pack contains 100 disposable gloves, which can be worn on both the right and left. They are available online in sizes S-XL and come in the colour light beige. Area of application of the disposable gloves The latex disposable gloves are particularly suitable for use in the care sector. care sector. Be it for inpatient or outpatient care institutionsthe examination glove can always be used. Also for the independent sector it is suitable. Quality assurance of disposable gloves CE labelling on all packaging levels CE classification: Class I AQL 1.5 EN 455 - 1, 2, 3, 4

S, M, L, XL | 100 pcs. | transparent | powder-free | EN 455 | EN 374 | suitable for allergy sufferers For allergy sufferers the disposable vinyl glove is a good substitute, as it contains no latex proteins and the harmful plasticiser DEHP is not present. Thanks to its smooth surface and vinyl material, the disposable glove feels particularly soft and is ideal for grooming or hairdressing. The vinyl disposable glove is powder-free and non-sterile. They are available to buy online in sizes S-XL. 100 disposable gloves can be found in each individual pack, which can be worn by both hands. Disposable vinyl gloves are a soft and inexpensive product. These disposable gloves can even be used for medical purposes as they fulfil the requirements of European Standard 455. Field of application of the disposable gloves Disposable vinyl gloves are best used for hairdressing studios or other care facilities care facilities. However, they can also be used well in the areas of catering, hotel industry and the food industry and the food industry, as well as trade serve. Quality specifications of the disposable gloves EN 455 - 1, 2, 3, 4 - EN 374 - 1, 2, 3 Directive 89/686/EEC - AQL 1.5 CE labelling on all packaging levels CE classification: Class I

S, M, L, XL | 100 pcs. | blue | powder-free | EN 455 | EN ISO 374 | Category III Disposable nitrile gloves The MaiMed nitrile disposable glove LG PF is a disposable nitrile glove with a length of 300 mm for additional protection and safety. The MaiMed brand always guarantees top quality. Especially when handling irritating liquids or chemicals, it reliably protects not only the hand but also the forearm. The micro-roughened surface of the disposable glove gives it a high degree of grip, even when wet. The nitrile disposable glove LG PF contains no latex proteins and is therefore very suitable for allergy sufferers. Properties Disposable nitrile glove Brand name MaiMed Length: 300 mm Very tear-resistant and elastic latex-free powder-free non-sterile Colour: blue Quality assurance of disposable gloves EN 455 - 1, 2, 3, 4; EN ISO 374 - 1, 2, 4, 5; EN ISO 16523-1; ASTM D6319; CAT III, Regulation (EU) 2016/425; AQL 1.5 CE marking on all packaging levels CE classification: Class I The glove is free from thiuram substances, mercaptobenzothiazoles and zinc-2 mercaptobenzothiazoles. The accelerators used for production are zinc dibutyl dithiocarbamate (ZDBC) and zinc diethyl dithiocarbamate (ZDEC). Protective glove according to the regulation for personal protective equipment (EN 2016/425) category III. Further information on request. Pieces per box: 100 Area of application of the disposable gloves Disposable glove is suitable for industry/trade with a focus on the food industry, building cleaning, agriculture.

S, M, L, XL | 100 pieces | black | powder-free | EN 455 | EN 374 | category III Black nitrile examination and protective gloves The nitrile examination gloves in black are suitable for use in the medical sector as well as for handling food. The disposable nitrile gloves are skin-friendly, latex-, powder- and protein-free. They are ideal for sensitive users and allergy sufferers. The protective gloves offer a good grip thanks to the micro-roughened surface. The disposable nitrile gloves are ambidextrous, elasticated and tear-resistant, making them very comfortable to wear. Properties of nitrile gloves Disposable nitrile glove elasticated Tear-resistant Skin-friendly latex-, powder- and protein-free non-sterile micro-roughened Colour: black can be worn on the right and left with rolled edge Sizes: S to XL Package contents: 100 pieces per box Areas of application: The disposable nitrile gloves are suitable for handling cleaning agents and disinfectants, as well as food. The protective gloves are therefore used in laboratories, in the pharmaceutical industry, in professional cleaning, in the food sector e.g. catering etc. Quality assurance of examination gloves  EN 455 - 1, 2, 3, 4; EN 374 - 1, 2, 4, 5; EN 16523 - 1 EN ISO 13485:2016 AQL 1.5 Class I medical device according to regulation (EU 2017/745) Protective glove according to the regulation for personal protective equipment (EU 2016/425) category III.

XS, S, M, L, XL | light beige | box of 100 | EN 455-1, 2, 3, 4 / EN ISO 374 - 1, 2, 4, 5 / EN 16523-1 / CAT III / AQL 1.5 | CE class I Disposable latex glove The sensitive PF disposable glove is a light beige latex examination glove. It is powder-free and non-sterile. This disposable latex glove is particularly suitable for everyday functions where cleanliness and protection are important. Thanks to the highly textured surface and special treatment, they are particularly easy to grip, even when wet. Each pack contains 100 disposable gloves that can be worn on both hands. Disposable latex glove Quality assurance EN 455-1, 2, 3, 4 / EN ISO 374 - 1, 2, 4, 5 / EN 16523-1 / CAT III / AQL 1.5 CE labelling on all packaging levels CE classification: Class I Powder-free and non-sterile Colour: light beige Disposable glove can be worn on the left and right. heavily textured surface 100 pieces per box Area of application of the disposable gloves The disposable glove is particularly suitable for use in dental practices and laboratories.

XS, S, M, L, XL | light beige | box of 100 | EN 455-1 | CE class I Disposable latex glove The disposable glove is a light beige latex glove. It is powder-free and non-sterile. This disposable latex glove is particularly suitable for everyday functions where cleanliness and protection are important. The micro-roughened surface guarantees a good grip. This makes this glove the all-rounder among latex disposable gloves. The disposable glove is available to buy online in sizes XS - XL. Each pack contains 100 disposable gloves that can be worn on both hands. Disposable latex glove Quality assurance EN 455-1, AQL 1.5 CE marking on all packaging levels Powder-free and non-sterile Colour: light beige Disposable glove can be worn left and right. Micro-roughened surface 100 pieces per box Area of application for disposable gloves The disposable glove is ideal for use in hospitals, doctors' surgeries and care settings, as well as in the catering, hotel and food industries.

S, M, L, XL | 100 pcs. | powder-free | black | EN 455 - 1, 2, 3, 4; EN ISO 374 - 1, 2, 3, 4, 5 The latex examination glove Black LX is an examination glove made of latex, that is particularly comfortable to wear. This is thanks to its smooth surface. The Black LX disposable glove is also very robust and stretchy and remains comfortable on the skin even after prolonged use. Its black colour gives it an elegant appearance and is therefore also suitable for areas with customer contact. Properties and use of the examination gloves Disposable latex glove Smooth surface very robust and elastic powder-free non-sterile black Can be worn on the right and left Disposable glove is suitable for hotels, catering, hairdressing salons, tattoo and piercing studios Quality assurance of the examination gloves EN 455 - 1, 2, 3, 4; EN ISO 374 - 1, 2, 3, 4, 5; EN 420; CAT III; ASTM D6319 Regulation (EU) 2016; AQL 1.5 CE labelling on all packaging levels CE classification: Class I Protective glove according to the regulation for personal protective equipment (EN 2016/425) category III. Units per box: 100

XS, S, M, L, XL | 100 pcs. | colour mix | powder-free | EN 455 | EN ISO 374 | category III Colourful disposable nitrile gloves The nitrile disposable gloves Style tutti frutti by Med Comfort are non-powdered premium nitrile gloves. The material is thin (0.05 to 0.08 mm) and ensures extremely good tactile sensitivity. The textured fingertips also ensure the best grip. The pack contains a mix of four colours - yellow, pink, apple green and orange. Thanks to the mix of colours, the nitrile gloves are suitable everywhere and bring colour into everyday life. As latex-free disposable gloves, they are also suitable for allergy sufferers. Properties and use of disposable nitrile gloves Disposable nitrile glove textured fingertips Coating: chlorinated on the inside thin (0.05 to 0.08 mm) latex-free unpowdered non-sterile ambidextrous colour mix: yellow, pink, apple green, orange Disposable glove is suitable for the food industry, medicine, industry etc. Quality assurance of the disposable gloves EN 455-4, EN 455-3, EN 455-2, EN 420 and EN 455-1 / AQL 1.5 CE labelling on all packaging levels CE classification: Class I Personal protective equipment category: PPE CAT I Pieces per box: 100

Lightweight and breathable This coverall can be used universally and protects clothing from soiling. The protective gown is ideal as a ward and visitor gown with high safety requirements and protects against the spread of germs in care facilities for the elderly and hospitals. Product features Coverall made of non-woven polypropylene With zip and hood 30 g/m² quality With arm and foot cuffs (latex-free) With elasticated waistband (latex-free) Lightweight and breathable Air-permeable and moisture-repellent Suitable for the food industry (HACCP) Sizes: XL (177 x 142 cm) & XXL (184 x 150 cm) Colour white

DIN EN 149:2001 + A1:2009. CE 0598. 25 piece box FFP2 masks are particle-filtering half masks that guarantee a filter performance of at least 94% (FFP2 / KN95 / N95) of aerosols and fine dust particles up to a size of 0.6 μm. FFP2 masks are therefore suitable for effective protection against solid and liquid harmful dusts, smoke, bacteria and viruses that are inhaled via the air we breathe. The mouth and nose area is completely covered for optimum protection. FFP2 protective masks are tested in accordance with the European standard (EN 149). Health authorities often refer to these standards for protection against viruses such as the coronavirus during an epidemic, pandemic or in emergency situations. If in doubt, contact the Federal Office of Public Health directly to find out about comprehensive respiratory protection regulations. DOC NFW FFP2 masks (fish-type FFP2 mask) DOC NFW FFP2 masks without a valve provide the best possible protection against droplets, dust, aerosols, mould spores, viruses and bacteria. This fish-shaped FFP2 mask is held in place with highly elasticated ear loops. The preformed FFP2 mask is particularly comfortable to wear. Each FFP2 mask is individually packed in a polybag. One box contains 25 fish-shaped FFP2 masks. FFP2 masks without valve in fish shape Fixation with highly elasticated ear loops Standard: FFP2 DIN EN 149:2001 + A1:2009 CE certified: CE 0598 Filter performance min. 94% 5-layer FFP2 mask Full nose and mouth coverage Very comfortable to wear Suitable for single use only (up to max. 8 hours) Individually packed in a polybag Box of 25 Area of application of the FFP2 mask: Hospitals Emergency services Construction and metal industry Mining industry Catering industry Medical use Industrial safety External protection and self-protection When is the use of an FFP2 mask recommended? The Federal Office of Public Health (FOPH) recommends that doctors and medical care staff use an FFP2 protective mask when treating and caring for people suspected of being infected with the new coronavirus (COVID-19). Wearing the protective mask is recommended for up to 30 minutes during activities with a high risk of aerosol formation. The maximum wearing time of an FFP2 mask is 8 hours, so it can be worn for the entire working shift. Use of FFP2 masks: FFP2 masks only provide effective protection if they are fitted and worn correctly. Before use, check the durability of the protective mask and follow the operating instructions. Before touching each protective mask for the first time, wash your hands thoroughly with soap or hand sanitiser. In the first step, mould a nose clip with one finger. Then pull the lower strap over your head and place it on the back of your neck. Then, insert the chin, pull it over the nose and place the upper band above the ears. Now position the FFP2 mask using the tabs and adjust the straps and nose clip individually. Finally, check that the mask fits tightly and adjust it again if air escapes.

S, M, L, XL | 100 pcs. | black | powder-free | EN 455 - 1, 2, 3, 4; EN ISO 374 - 1, 2, 3, 4, 5 The nitrile examination glove Black is an examination glove made of nitrile and the latex-free alternative to the Black LX latex glove. It is robust and offers good tactile sensitivity with its textured fingertips. Its black colour gives it an elegant appearance and is therefore also suitable for areas with customer contact. It is suitable for allergy sufferers as it does not contain latex. Properties and use of examination gloves Disposable nitrile glove textured fingertips Very robust latex-free powder-free non-sterile black Can be worn on the right and left Disposable glove is suitable for hotels, catering, industry/crafts, hairdressing salons, tattoo and piercing studios Quality assurance of the examination gloves EN 455 - 1, 2, 3, 4; EN ISO 374 - 1, 2, 3, 4, 5; ASTM D6319-10; Regulation (EU) 2016/425; AQL 1.5 CE marking on all packaging levels CE classification: Class I The glove is free from thiuram substances, mercaptobenzothiazoles and zinc-2 mercaptobenzothiazoles. The accelerators used for production are zinc dibutyl dithiocarbamate (ZDBC) and zinc diethyl dithiocarbamate (ZDEC). Protective glove according to the regulation for personal protective equipment (EN 2016/425) category III. Further information on request. Pieces per box: 100

made from CPE film Disposable overshoes made of CPE film to protect against contamination, for use in sensitive production areas or to increase the safety of your employees. Disposable overshoes are one of the most important preventive measures for avoiding contamination (loose dust, dirt, infections) in sensitive production and medical areas. CPE film is a new mixed film with the good properties of PVC, but without the serious disposal problems. The disposable overshoes can be put on quickly and easily over street or work shoes, ideal for visitors and staff. Disposable overshoes made from CPE film Extra strong and hard-wearing waterproof antistatic Colour: blue Content: 100 pieces

XS, S, M, L, XL | 100 pieces | light blue | powder-free | EN 455 | EN 374 | category III Stretchy nitrile examination and protective gloves The nitrile examination gloves are skin-friendly, latex-free, powder-free and protein-free. They are also suitable for allergy sufferers. The micro-roughened surface provides a better grip. The nitrile disposable gloves are particularly stretchy thanks to their elasticated and tear-resistant manufacture. They are very comfortable to wear, can be worn with both hands and have a rolled edge. Properties of nitrile gloves Disposable nitrile glove elasticated Tear-resistant Skin-friendly latex-, powder- and protein-free non-sterile micro-roughened Colour: light blue can be worn on the right and left with rolled edge Sizes: XS to XL Package contents: 100 pieces per box Areas of application: The disposable nitrile gloves are suitable for handling cleaning agents and disinfectants, as well as food. The protective gloves are therefore used in laboratories, in the pharmaceutical industry, in professional cleaning, in the food sector e.g. catering etc. Quality assurance of examination gloves  EN 455 - 1, 2, 3, 4; EN 374 - 1, 2, 4, 5; EN 16523 - 1; EN 21420:2020 EN ISO 13485:2016 AQL 1.5 Class I medical device according to regulation (EU 2017/745) Protective glove according to the regulation for personal protective equipment (EU 2016/425) category III.

DIN EN 149:2001+A1:2009. CE 0598 -- Available immediately -- Dispatch within 24 hours -- FFP2 masks DOC-NFC The ergonomic design of the FFP-2 DOC-NFC masks adapts to the contours of the face, making them extremely comfortable to wear. extremely comfortable to wear. The multi-layer filtration offers optimum protection against harmful particles. The ear straps allow for individual adjustment of the FFP2 mask and the integrated nose clip over the nose area prevents any leaks. Standard: FFP2 DOC-NFC DIN EN 149:2001 + A1:2009 CE certified: CE 0598 / data sheet Filter performance min. 94% (FFP2 / KN95 / N95) 5-ply Full nose and mouth coverage Suitable for single use only (up to max. 8 hours) The FFP2 masks are all individually packed in a polybag Packaging unit: 30 pieces per box FFP2 masks manufacturer The manufacturer of these FFP2 masks is one of the world's most renowned manufacturers of particle-filtering half masks (FFP2 masks). The masks are produced using state-of-the-art production machines that guarantee consistently high quality. Only raw materials of the highest quality are used and all production processes are constantly monitored. When is the use of an FFP2 mask recommended? The Federal Office of Public Health (FOPH) recommends that doctors and medical care staff use an FFP2 protective mask when treating and caring for people suspected of being infected with the new coronavirus (COVID-19). Wearing the protective mask is recommended for up to 30 minutes during activities with a high risk of aerosol formation. The maximum wearing time of an FFP2 mask is 8 hours, so it can be worn for the entire working shift. Use of FFP2 masks FFP2 masks only provide effective protection if they are fitted and worn correctly. Check the durability of the protective mask before use and follow the operating instructions. Before touching each protective mask for the first time, wash your hands thoroughly with soap or hand sanitiser. In the first step, mould a nose clip with one finger. Then pull the lower strap over your head and place it on the back of your neck. Then, insert it with your chin, pull it over your nose and secure it behind your head with the head loops. Now position the FFP2 mask using the tabs and adjust the straps and nose clip individually. Finally, check that the mask fits tightly and adjust it again if air escapes. Note on pricing The prices for FFP2 masks, disinfectants and protective clothing are currently significantly higher than a few weeks and months ago due to the extraordinary situation. There are three reasons for this: Higher purchase prices: Rising costs for the raw materials of FFP2 masks and exorbitant demand are leading to higher purchase prices for manufacturers. Exploding freight costs: Canceled flight connections and container ships stuck in harbours have caused transport costs to skyrocket. Major entrepreneurial risk: Since the outbreak of the epidemic, the Chinese government has imposed new restrictions and bans on the export of protective equipment on an almost daily basis. The danger and the associated risk for AcuMax as a trading company that, for example, FFP2 masks may suddenly no longer be exported is considerable. Orders with very high quantities, which could reduce prices somewhat, are not acceptable due to this high risk. Daily prices: Due to the uncertain raw material situation and the associated varying manufacturing costs, purchase prices also fluctuate. We therefore reserve the right to adjust the sales prices for the various deliveries.

XS, S, M, L, XL | 100 pcs. | white | powder-, protein- and latex-free | EN 455 | EN 374 | category III White nitrile protective gloves The Nitril® 3000 examination gloves in white are suitable for handling cleaning products and disinfection. The disposable nitrile gloves are powder-, protein- and latex-free. Nitril® 3000 examination gloves are particularly suitable for people with latex allergies (type I). The protective gloves can be worn on both sides and each has a rolled edge. The micro-roughened surface and the elastic and tear-resistant material offer a high level of comfort with a good grip. Properties of the nitrile gloves Disposable nitrile glove Elastic Tear-resistant Skin-friendly latex-, powder- and protein-free non-sterile micro-roughened Colour: white can be worn on the right and left with rolled edge Sizes: XS to XL Package contents: 100 pieces per box Areas of application: The nitrile examination gloves are suitable for handling cleaning agents and disinfectants and for other applications in the laboratory, pharmaceutical industry, professional cleaning, catering and handling food in general. Quality assurance of examination gloves  EN 455 - 1, 2, 3, 4; EN 374 - 1, 2, 4, 5; EN 16523 - 1 ; EN 420:2003+A1:2009 EN ISO 13485:2016 AQL 1.5 Medical device class I according to regulation (EU 2017/745) Protective glove according to the regulation for personal protective equipment (EU 2016/425) category III.

Polyethylene | size L | transparent or blue Disposable gloves made of transparent polyethylene The soft and very tear-resistant LDPE disposable gloves Hygostar Polyclassic Soft offer ideal protection for short-term work. The disposable gloves are made of low-density polyethylene and are transparent. The embossing ensures that they are particularly tear-resistant. The LDPE disposable gloves are used for protection during short-term work in the kitchen, in the food industry, in the medical sector and at petrol stations. Colour: transparent Size: L Material: LDPE (Low Density Polyethylene) non-sterile soft tear-resistant suitable for food CE Cat 1 Content: 100 pieces Areas of application: Kitchen, food industry, medicine, petrol station

XS, S, M, L, XL | 100 pieces | powder-free | EN 374, EN 455 T 1-4, CE | food-safe Nitrile gloves from Unigloves Pearl Line The Unigloves Orange Pearl nitrile gloves are disposable, food-safe nitrile gloves. This protective glove is powder-, latex-, thiuram- and protein-free. The nitrile material is waterproof, extremely tear-resistant and offers good protection against viruses, fungi and bacteria. The micro-roughened fingertips ensure good tactile sensitivity. As a latex-free disposable glove, it is also suitable for allergy sufferers. The Pearl Line nitrile glove from Unigloves has a flexible fit and can be worn with both hands. The Pearl Line nitrile gloves from Unigloves are tested in accordance with the PPE Regulation (EU) 2016/425 and the European standards EN 374, EN 420 and EN 455. Properties and use of nitrile gloves Disposable nitrile glove Unigloves Pearl line brand micro-roughened fingertips very tear-resistant and elastic latex-free powder-free non-sterile rolled edge orange Disposable glove is suitable for the food industry, catering, industry, hospitals, medical practices, cosmetics and hairdressing salons, as well as tattoo studios Pieces per box: 100 Quality assurance of the nitrile gloves EN 374 CAT III / type C, EN 420; MPG / EN 455 part 1-4 / EN ISO 13485:2016 / (EU) 2016/425; AQL 1.5 CE marking on all packaging levels CE classification: Class I Protective glove according to the regulation for personal protective equipment (EN 2016/425) category III. Material properties of nitrile gloves Nitrile disposable gloves are stretchy, tear-resistant and chemical-resistant. Nitrile is a synthetic rubber, a material that is particularly resistant and offers good protection against viruses, fungi and bacteria. This makes the protective glove particularly popular and frequently used in medical areas. The material does not cause irritation or allergic reactions and is therefore also suitable for sensitive skin. The high level of comfort and good tactile sensitivity combined with high elasticity and tear resistance make nitrile examination gloves ideal for a wide range of applications. UNIGLOVES Unigloves is a leading company for disposable and reusable products for medical and clinical use, care, industry and personal protective equipment. Unigloves has stood for safety and quality for 30 years. Unigloves disposable medical gloves of the highest quality are manufactured by hand in the company's own production facility in Malaysia.

1-fold or 3-fold filling Stainless steel wall holder for glove boxes The wall holder for glove boxes is made of stainless steel. The holder enables simple and practical storage of glove boxes. The wall holder for glove boxes ensures quick and easy removal of disposable gloves. The high-quality glove wall holder is available in two sizes, for single or triple filling. Material: stainless steel With spring Sizes: 1-fold: 135 x 246 x 106 mm 3-fold: 410 x 246 x 81 mm

DIN EN 149:2001 + A1:2009 | CE-certified CE 0598 | Box of 30 -- Available immediately -- Dispatch within 24 hours -- Box of 30 black FFP2 masks DOC-NFC - 1 pc. = 30 black FFP2 masks FFP2 masks are particle-filtering half masks that guarantee a filter performance of at least 94% (FFP2 / KN95 / N95) of aerosols and fine dust particles up to a size of 0.6 μm. FFP2 masks are therefore suitable for effective protection against solid and liquid harmful dusts, smoke, bacteria and viruses that are inhaled via the air we breathe. The mouth and nose area is completely covered for optimum protection. FFP2 protective masks are tested in accordance with the European standard (EN 149). Health authorities often refer to these standards for protection against viruses such as the coronavirus during an epidemic, pandemic or in emergency situations. If in doubt, contact the Federal Office of Public Health directly to find out about comprehensive respiratory protection regulations. Black FFP2 masks DOC-NFC The ergonomic design of the FFP-2 masks adapts to the contours of the face, making them extremely comfortable to wear. extremely comfortable to wear. The multi-layer filtration offers optimal protection against harmful particles. The earbands allow for individual adjustment of the FFP2 mask and the integrated nose clip over the nose area prevents any leaks. The FFP-2 masks are supplied individually packed in boxes of 30. 30 black FFP2 masks DOC-NFC DIN EN 149:2001 + A1:2009 CE certified: CE 0598 Filter performance min. 94% (FFP2 / KN95 / N95) 5-ply Full nose and mouth coverage Suitable for single use only (up to max. 8 hours) The FFP2 masks are all individually packed in a polybag Packaging unit: 30 black FFP2 masks per box FFP2 masks manufacturer The manufacturer of these FFP2 masks is one of the world's most renowned manufacturers of particle-filtering half masks (FFP2 masks). The masks are produced using state-of-the-art production machines that guarantee consistently high quality. Only raw materials of the highest quality are used and all production processes are constantly monitored. When is the use of an FFP2 mask recommended? The Federal Office of Public Health (FOPH) recommends that doctors and medical care staff use an FFP2 protective mask when treating and caring for people suspected of being infected with the new coronavirus (COVID-19). Wearing the protective mask is recommended for up to 30 minutes during activities with a high risk of aerosol formation. The maximum wearing time of an FFP2 mask is 8 hours, so it can be worn for the entire working shift. Use of FFP2 masks FFP2 masks only provide effective protection if they are fitted and worn correctly. Check the durability of the protective mask before use and follow the operating instructions. Before touching each protective mask for the first time, wash your hands thoroughly with soap or hand sanitiser. In the first step, mould a nose clip with one finger. Then pull the lower strap over your head and place it on the back of your neck. Then, insert it with your chin, pull it over your nose and secure it behind your head with the head loops. Now position the FFP2 mask using the tabs and adjust the straps and nose clip individually. Finally, check that the mask fits tightly and adjust it again if air escapes. Buy black FFP2 masks | Cheap from Swiss stock Would you like to buy a safe, reliable and black FFP2 mask from a certified manufacturer to protect against the COVID-19 virus? Then the online shop of AcuMax Med AG is the right place for you. You can buy CE-certified black FFP2 masks from institutes with the CE test number CE 0598 and CE 2834 at favourable prices directly from our Swiss warehouse. As a company or organisation, you benefit from our advantageous graduated prices for larger order quantities. We currently have a stable supply chain with reliable and CE-certified manufacturers behind us and can supply even large quantities of black FFP2 masks. Advantages of FFP2 masks Simple face masks filter some of the particles and viruses out of the air. This reduces their concentration and the associated risk of infection. In the case of large aerosol particles, simple face masks also offer effective protection. However, as these particles shrink in the air, they can pass through simple face masks when inhaled. However, FFP2 respirators are denser compared to a simple face mask and therefore filter more smaller particles. As a result, FFP2 masks offer more protection for the wearer. However, this only applies if the FFP2 mask is worn correctly. The FFP2 mask must fit very close to the face so that the air cannot flow unfiltered between the face and the mask. The masks must be CE certified and manufactured in accordance with the DIN EN 149:2001 standard.

S, M, L, XL | 100 pcs. | white | latex- and powder-free | EN 420:2003+A1:2009, EN 388:2016, EN ISO 374-5:2016 The disposable vinyl gloves in white are particularly suitable for hygienic treatment of customers. Thanks to the thin, smooth surface, the vinyl gloves are particularly comfortable to wear and provide an optimum tactile feel. The vinyl gloves also have a pleasantly soft texture and are extremely stretchy and tear-resistant. As the work gloves are free from powder and latex, they are also the perfect choice for people with latex allergies. The gloves can be worn on both the right and left and have been tested in accordance with the quality guidelines listed below. These disposable vinyl gloves are suitable for use in the food, industrial and medical sectors. Content: 100 disposable vinyl gloves per box Product characteristics Material: Vinyl Sterility: Non-sterile Latex and powder-free Colour: white EN 420:2003+A1:2009, EN 388:2016, EN ISO 374-5:2016 CE classification: Class I

With adjustable temples and side protection for perfect coverage of the eye area. Safety spectacles with adjustable temples and anti-fog polycarbonate lens with side protection. These safety spectacles are adapted to the most common industrial risks. The anti-scratch coating acts as a protective film that improves the resistance of lenses and prevents scratches - this coating extends the life of the safety spectacles and improves user comfort, as scratches could restrict the field of vision. Safety spectacles with adjustable temples Adjustable temple length Includes temple holes for a lanyard Safety spectacles with anti-fog polycarbonate lens and side protection Clear, scratch-resistant polycarbonate lens with all-round vision and excellent coverage of the eye area Safety spectacles Areas of application Industry, chemicals, construction, laboratory Garden, agriculture and forestry Craftsmen, leisure and hobby sector, etc. Spithospitals, clinics, medical facilities Physiotherapy practices, osteopathy practices, massage practices Public institutions, administrations Events and events

S, M, L, XL | 100 pcs. | powder-free | black | EN 455 - 1, 2, 3, 4; EN ISO 374 - 1, 2, 3, 4, 5 Disposable latex gloves The latex examination glove Black is a examination glove made from latex, that is particularly comfortable to wear. This is thanks to its smooth surface. The Black disposable glove is also very robust and stretchy and remains comfortable on the skin even after prolonged use. Its black colour makes it look elegant and is therefore also suitable for areas with customer contact. Properties and use of the examination gloves Disposable latex glove Smooth surface Very robust and elastic powder-free non-sterile black Can be worn on the right and left Disposable glove is suitable for hotels, catering, hairdressing salons, tattoo and piercing studios Quality assurance of the examination gloves EN 455 - 1, 2, 3, 4; EN ISO 374 - 1, 2, 3, 4, 5; EN 420; CAT III; ASTM D6319 Regulation (EU) 2016; AQL 1.5 CE marking on all packaging levels CE classification: Class I Protective glove according to the regulation for personal protective equipment (EN 2016/425) category III. Units per box: 100

yellow | 12 pieces | S, M, L, XL | food-safe | EU2016/425 category I Disposable latex glove for universal use The all-purpose latex glove Bettina Hygostar is suitable for use in cleaning, the food industry, catering, industry, agriculture and the household. The all-purpose glove made of latex and cotton offers a secure grip even in wet environments thanks to its textured surface. The disposable glove is flocked with cotton on the inside, offers a comfortable fit and good sweat absorption. Disposable latex glove EU2016/425 Category I / EU1935/2004 textured surface Flocked with cotton on the inside Extremely tear-resistant non-slip thanks to honeycomb profile with rolled edge ideal fit total length: 300 mm colour: yellow Sizes: S to XL Packaging unit: 12 pairs Application area of the disposable gloves The disposable glove is ideal for use in cleaning, the food industry, catering, industry, agriculture and in the household

S, M, L, XL | 1 pair | green | powder-free | EN 420:2003+A1:2009 | EN ISO 374 | category III Nitrile protective glove in pairs in a bag The MaiMed Safety touch nitril protect is a protective glove with a high level of comfort thanks to cotton flocking on the inside. Thanks to the length of approx. 330 mm and the material thickness of 12 mil, it offers protection and safety. Thanks to the textured surface on the palm, the protective glove offers a good grip, even when wet. The tear-resistant protective glove MaiMed Safety touch nitril protect is particularly suitable for handling hazardous chemicals, as it fulfils the highest safety requirements. Packaging unit: 1 pair per bag Characteristics Protective glove made from nitrile Brand name MaiMed Length: 330 mm Material thickness: 12 mil Extremely tear-resistant and hard-wearing latex-free powder-free non-sterile suitable for use with food Colour: green Quality assurance of the disposable gloves EN 420:2003+A1:2009; EN 388:2016; EN ISO 374-1:2016+A1:2018/Type A; EN ISO 374-5:2016; AQL 4.0 CE marking on all packaging levels CE-2777 Protective glove in accordance with Regulation (EU) 2016/425 for personal protective equipment, category III Area of application of the disposable gloves Disposable glove is suitable for the food industry, chemical industry and in laboratories.

Polycarbonate | CAT II | EN 166 All-purpose safety spectacles for spectacle wearers The safety spectacles Hygostar for spectacle wearers can be used universally. The safety spectacles are ideal for wearing over prescription spectacles. The transparent polycarbonate lenses provide a clear view and are scratch-resistant. The safety spectacles Hygostar for spectacle wearers can be used universally. Features: Certified in accordance with EN 166 (personal eye protection) Material: Plastic Lenses: Polycarbonate Colour: transparent Suitable for wearing over prescription glasses Universally applicable Delivery unit: 1 piece

EN 149:2001+A1:2009. CE 0598 The white FFP3 mask is intended for single use. With protection class FFP3, this respirator offers the highest certification in the field of FFP masks. This means that it also protects your respiratory system against hazardous and harmful substances such as asbestos, mould and other pathogens. Despite the exceptional level of protection, the FFP3 mask offers a high level of comfort. The anatomical shape and the bendable nose clip guarantee a comfortable and secure fit. FFP3 masks without valve 5-ply Protection against particle sizes: at least 99% Protection against toxic substances as well as droplet aerosols, viruses, bacteria, fungi and their spores Colour white EN 149:2001 + A1:2009 CE certified: CE 0598 Packaging unit: 30 FFP3 masks per box

Lightweight and breathable For universal use as headgear. Used in hospitals, nursing, the food industry, production and manufacturing. Clipped cap made of clipped non-woven polypropylene fabric With all-round elasticated band One size fits all Lightweight and breathable latex-free inexpensive universal cap air-permeable and temperature-regulating suitable for HACCP purposes sterilisable: EO; R One size fits all: Ø 53cm colours: white / blue Box contents: 100 clip-on bonnets (1 pc. = 1 box = 100 bonnets) Clip-on bonnets are mainly used in the food industry. They are generally slightly cheaper than beret bonnets, also only cover the upper part of the head and are fixed in place with an elastic band. In contrast to nurse caps, clip-on caps are initially gathered into narrow strips. This means they can be stored to save space. You can then open and put on the clip-on bonnets in one easy step. Clip-on caps serve to protect against infection, for example by preventing hair and skin flakes from getting into open wounds during a medical operation. A disposable cap can also be used to prevent food in the food industry or catering industry from being contaminated by hair or Schupp. Disposable caps can also be worn during renovation work, for example, to prevent hair from being contaminated by paint or dust.

Protective gown Coat ViruGard MaiMed made of polypropylene non-woven fabric is virus-proof, non-sterile, with a safety lamination in the front and arm area and a breathable back area. The gown has fastening straps at the neck and waist and cotton cuffs. It is highly fluid, blood and particle repellent. The latex-free material can be sterilised with ethylene oxide and radiation. Features Protective gown made of non-woven polypropylene fabric Universal size (140 x 140 cm) 30 g/m² quality (yellow) With fastening straps at the neck and waist Bamboo cuffs at the sleeve ends (latex-free) Breathable back area Highly liquid and particle repellent CE labelling on all packaging stages CE classification: Class I Scope of delivery: 10 pieces per pack Application For protection in the care and hygiene sector, for all areas of use with high safety requirements. It protects against the spread of germs and is also suitable as an MRSA protective gown.

10 pairs | EN 511 | EN 388 (1141X), CE CAT II | EN 407 Non-slip reusable glove made from Thermastat fibre The Nitrex 299G protective glove from UNIGLOVES has a Thermastat fibre lining and is certified to EN 388, EN 511 and EN 407. The work glove offers level 1 protection against the cold, which corresponds to approx. -10° C. The Nitrex 299G cold protection glove is food-safe and offers a non-slip surface thanks to the PVC studs, which ensures optimum grip. The ergonomic fit and high flexibility ensure a high level of comfort. The protective glove is used for transport and storage work in cold stores, for direct contact during the processing of chilled food and in all areas where products with temperatures around freezing point are processed. Advantages: Inner lining made of Thermastat fibre - protection against the cold Protection level 1 (approx. -10° C) PVC studs on the palm Non-slip Ergonomic fit Flexible Food-safe The Nitrex 299G cold protection glove, manufactured in accordance with the EN 388 standard, is suitable for use in the food sector. Features: Theramstat fibre Material: polyamide PVC studs Non-slip, flexible, ergonomic Colour: blue Food safe Classification: EN 388 (1141X), CE CAT II, EN 511, EN 407, UKCA, food-safe Sizes: S (women's size) L (men's size) Field of application: Food processing Transport and storage work in cold stores Manufacturing and production of chilled food Waste management and municipal work Contents10 pairs

12 pairs | EN 374 CAT III - Type B; EN 388:2016; EN ISO 13485:2016 Natural latex glove for household and industry The Allsafe Eco reusable glove from Unigloves is an extra-long, extremely resistant reusable glove for industrial and household use. The latex glove is extremely hard-wearing, has an integrated scale pattern on the surface and is very comfortable to wear thanks to the soft cotton lining. Thanks to the extra-long cuff with rolled edge, the Allsafe Eco provides extra protection against liquid spillages. Advantages: Soft cotton lining High wearing comfort Incorporated scale pattern Extra long shaft Rolled edge Durable The Allsafe Eco reusable glove from Unigloves is resistant to a wide range of chemicals and strong cleaning agents in accordance with EN ISO 374-1 and EN ISO 374-5. The natural latex glove provides reliable protection against fungi and bacteria. Properties: Latex glove Inside: Cotton lined Material: Latex Resistant to: chemicals, cleaning agents, fungi, bacteria Incorporated scale pattern Colour: Blue Extra-long shaft with rolled edge Food-safe Non-sterile Material thickness:0.35 ± 0.05 mm Classification: EN 374 CAT III - Type B; EN 388:2016; EN ISO 13485:2016 Sizes: M (7-8) L (8-9) XL (9-10) Field of application: Industry household Food industry Laboratory Contents1 pair